by ascadmin | Jul 12, 2022 | Common Problems
Tips for Eliminating Slippery Oily Floors The air filtration (MistBuster – Tri-Mist) system on the CNC is not working correctly causing oily floors. Make sure the air filtration unit is on and that the blower is running. Keep in mind that electrostatic air...
by ascadmin | Jun 23, 2022 | Common Problems
Blinking Light on your MistBuster, Tri-Mist or CoolBlaster? What to do When the Indicator Light Blinks? A Ground in the Unicell Assembly. The metal fins within the unicell cannot touch one another or the electrical current running through the charged cell will ground...
by ascadmin | Mar 11, 2020 | Common Problems
The Residue Ends Up Everywhere In many factories I find a thin oil residue on all the equipment, floors, and sometimes even the boxes for finished products. I see that all the CNC units have Air Filtration units attached like Tri-Mist and MistBusters, and in many...
by ascadmin | Sep 16, 2019 | Common Problems
Smoke and Oily Mist Comes Out of Everywhere I have seen many instances where mist is coming from the chip conveyor. The chip conveyor removes recently generated scrap metal from the bottom of the CNC, pulling the metal chips up and out the side, dumping them into a...
