by ascadmin | Jul 6, 2022 | General Maintenance
Tips for Cleaning Cells There comes a time where your equipment is running smoothly and then all of a sudden everything comes to a standstill. Cleaning cells in sources capture equipment on a CNC machine is crucial to reducing machine downtime. Soak the cells using a...
by ascadmin | Apr 16, 2020 | Air Flow, General Maintenance
How the Airflow Could be Reduced In many factories I see the large post HEPA filter sitting on top of many Mistbuster and Trimist electrostatic air filtration units. I would say that in probably 80 – 90% of these applications the HEPA filter is actually causing more...
by ascadmin | Mar 20, 2020 | General Maintenance
Getting The Cells Cleaned Effectively to Ensure Proper Operation The collection plates that are stacked closely together which make up each unicell assembly have a large surface area and can only be cleaned by submersion in a non-etching cell soap. (Cell soak 2000) If...
by ascadmin | Oct 10, 2019 | General Maintenance
Cost: Smog Hog – Mistbuster – Trion – Tri-Mist Some companies choose to wash their electrostatic cells in house as a cost savings procedure. But itemizing all the costs associated with this procedure might cause you to take a second look at outsourcing it. Parts...
by ascadmin | Aug 19, 2019 | General Maintenance
Mistbuster, CoolBlaster, SmogHog & Trion It all depends on how many units you have vs. manpower and equipment needed to clean them well, and be able to do it consistently and with efficiency. There are companies that wash electrostatic cells. It is important...
by ascadmin | Aug 13, 2019 | General Maintenance
Routine Maintenance = Clean Air Because most units are used in source capture applications. Without an inspection and service plan they stop working. Wash the electrostatic cells frequently enough so that they are not too hard to clean. Schedule time to INSPECT each...